Torex Semiconductor Ltd
Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
XC6124D525MR-G
Vezi detalii Foi de date

XC6124D525MR-G

Product Overview

Category

XC6124D525MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 150mA
  • Low Dropout Voltage: 200mV at 100mA
  • Low Quiescent Current: 30μA (typical)
  • Package Type: SOT-25
  • Essence: Voltage regulation and stabilization
  • Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 30μA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Package Type: SOT-25
  • Package Dimensions: 2.9mm x 2.8mm x 1.1mm

Detailed Pin Configuration

The XC6124D525MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient voltage regulation.
  • Wide input voltage range allows for versatile applications.
  • Low quiescent current minimizes power consumption.
  • Small package size enables space-saving designs.
  • Overcurrent protection safeguards the circuit from damage.

Advantages

  • High accuracy and stability in voltage regulation.
  • Low power consumption.
  • Compact size for easy integration into various electronic devices.
  • Overcurrent protection enhances circuit reliability.

Disadvantages

  • Limited maximum output current of 150mA.
  • Narrow operating temperature range (-40°C to +85°C).

Working Principles

The XC6124D525MR-G is a voltage regulator that operates by comparing the input voltage with a reference voltage. It adjusts the output voltage to maintain a stable and regulated level, even when the input voltage fluctuates. This is achieved through the use of internal feedback mechanisms and control circuitry.

Detailed Application Field Plans

The XC6124D525MR-G can be used in various applications, including but not limited to:

  1. Battery-powered devices: Provides stable voltage supply for portable electronics.
  2. IoT devices: Ensures reliable voltage regulation in connected devices.
  3. Automotive electronics: Supports voltage stabilization in automotive systems.
  4. Industrial equipment: Enables consistent voltage levels in industrial machinery.
  5. Consumer electronics: Facilitates proper voltage regulation in electronic gadgets.

Detailed and Complete Alternative Models

  1. XC6124D515MR-G: Similar specifications, but with a lower output voltage range (1.2V to 5.0V).
  2. XC6124D535MR-G: Similar specifications, but with a higher output voltage range (1.2V to 5.8V).
  3. XC6124D550MR-G: Similar specifications, but with a higher maximum output current (200mA).

Note: The above alternative models are just a few examples. There are several other alternatives available in the market with varying specifications and features.

In conclusion, the XC6124D525MR-G is a voltage regulator that offers efficient voltage regulation, low power consumption, and compact size. While it has limitations in terms of maximum output current and operating temperature range, it provides stability and reliability in various electronic applications.

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6124D525MR-G în soluțiile tehnice

Sure! Here are 10 common questions and answers related to the application of XC6124D525MR-G in technical solutions:

  1. Question: What is XC6124D525MR-G?
    - Answer: XC6124D525MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124D525MR-G?
    - Answer: The operating voltage range of XC6124D525MR-G is from 0.8V to 6.0V.

  3. Question: What is the output type of XC6124D525MR-G?
    - Answer: XC6124D525MR-G has an open-drain output type, which means it can be connected to other devices or circuits with a pull-up resistor.

  4. Question: What is the typical quiescent current consumption of XC6124D525MR-G?
    - Answer: The typical quiescent current consumption of XC6124D525MR-G is around 1.0µA.

  5. Question: Can XC6124D525MR-G be used for overvoltage detection?
    - Answer: No, XC6124D525MR-G is specifically designed for undervoltage detection. It triggers an output signal when the monitored voltage falls below a certain threshold.

  6. Question: What is the accuracy of the undervoltage detection threshold in XC6124D525MR-G?
    - Answer: The accuracy of the undervoltage detection threshold in XC6124D525MR-G is typically ±2%.

  7. Question: Does XC6124D525MR-G have built-in hysteresis?
    - Answer: Yes, XC6124D525MR-G has built-in hysteresis, which helps to prevent output oscillation near the detection threshold.

  8. Question: Can XC6124D525MR-G be used in battery-powered applications?
    - Answer: Yes, XC6124D525MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  9. Question: What is the temperature range of operation for XC6124D525MR-G?
    - Answer: XC6124D525MR-G can operate within a temperature range of -40°C to +85°C.

  10. Question: Is XC6124D525MR-G available in a surface-mount package?
    - Answer: Yes, XC6124D525MR-G is available in a surface-mount SOT-25 package, which makes it easy to integrate into compact electronic designs.

Please note that these answers are based on general information about XC6124D525MR-G and may vary depending on specific application requirements.