Consultați specificațiile pentru detalii despre produs.
XC6123E622MR-G
Product Overview
Category
XC6123E622MR-G belongs to the category of voltage regulators.
Use
It is primarily used for regulating voltage in electronic circuits.
Characteristics
- High precision voltage regulation
- Low dropout voltage
- Low quiescent current
- Thermal shutdown protection
- Short circuit protection
Package
XC6123E622MR-G is available in a small surface-mount package.
Essence
The essence of XC6123E622MR-G lies in its ability to provide stable and regulated voltage output.
Packaging/Quantity
XC6123E622MR-G is typically packaged in reels and comes in quantities of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Dropout Voltage: 200mV (typical)
- Quiescent Current: 30μA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6123E622MR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
- EN: Enable pin (optional)
Functional Features
- Voltage regulation: XC6123E622MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected, conserving power.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a safe threshold, preventing damage.
- Short circuit protection: XC6123E622MR-G safeguards against excessive current flow during a short circuit.
Advantages and Disadvantages
Advantages
- High precision voltage regulation ensures accurate output.
- Low dropout voltage allows for efficient operation in low input voltage scenarios.
- Low quiescent current minimizes power consumption.
- Thermal shutdown protection prevents overheating and damage.
- Short circuit protection safeguards the regulator and connected components.
Disadvantages
- Limited input voltage range (2.5V - 6.0V).
- Output voltage range may not be suitable for all applications.
Working Principles
XC6123E622MR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly. This feedback loop ensures that the output voltage remains stable even when the input voltage or load conditions change.
Detailed Application Field Plans
XC6123E622MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Tablets - Portable media players - Digital cameras - Wearable devices
Its voltage regulation capabilities make it suitable for any application where a stable and regulated power supply is required.
Detailed and Complete Alternative Models
Some alternative models that offer similar functionality to XC6123E622MR-G include: - XC6206P332MR-G - XC6219B332MR-G - XC6221B332MR-G - XC6230B332MR-G
These models have comparable specifications and can be considered as alternatives based on specific requirements.
Word count: 411 words
Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6123E622MR-G în soluțiile tehnice
Sure! Here are 10 common questions and answers related to the application of XC6123E622MR-G in technical solutions:
Question: What is XC6123E622MR-G?
- Answer: XC6123E622MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.Question: What is the operating voltage range of XC6123E622MR-G?
- Answer: The operating voltage range of XC6123E622MR-G is typically between 0.8V and 6.0V.Question: How does XC6123E622MR-G help in technical solutions?
- Answer: XC6123E622MR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level. This ensures proper system initialization and prevents data corruption.Question: What is the output type of XC6123E622MR-G?
- Answer: XC6123E622MR-G has an open-drain output type, which means it can be connected to other devices with a pull-up resistor to achieve the desired logic level.Question: What is the typical reset threshold voltage of XC6123E622MR-G?
- Answer: The typical reset threshold voltage of XC6123E622MR-G is 2.2V.Question: Can XC6123E622MR-G be used in battery-powered applications?
- Answer: Yes, XC6123E622MR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.Question: Does XC6123E622MR-G have a built-in delay circuit?
- Answer: Yes, XC6123E622MR-G has a built-in delay circuit that ensures the reset signal remains stable for a specified period after the power supply voltage rises above the threshold.Question: What is the typical reset delay time of XC6123E622MR-G?
- Answer: The typical reset delay time of XC6123E622MR-G is 200ms.Question: Can XC6123E622MR-G be used in automotive applications?
- Answer: Yes, XC6123E622MR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.Question: Is XC6123E622MR-G available in different package options?
- Answer: Yes, XC6123E622MR-G is available in various package options, including SOT-23-5 and USP-6C, providing flexibility for different design requirements.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6123E622MR-G.