Torex Semiconductor Ltd
Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
XC6123D725MR-G
Vezi detalii Foi de date

XC6123D725MR-G

Product Overview

Category

XC6123D725MR-G belongs to the category of voltage regulators.

Use

It is used to regulate and stabilize voltage levels in electronic circuits.

Characteristics

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Maximum Output Current: 200mA
  • Low Dropout Voltage: 150mV at 100mA
  • Low Quiescent Current: 30µA (typical)
  • Package Type: SOT-25
  • Operating Temperature Range: -40°C to +85°C

Package and Quantity

XC6123D725MR-G is available in a SOT-25 package. It is typically sold in reels containing 3000 units.

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.5V
  • Output Current: 200mA (maximum)
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 30µA (typical)
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.4% (typical)
  • Ripple Rejection Ratio: 70dB (typical)
  • Output Noise Voltage: 30µVrms (typical)
  • Short Circuit Protection: Yes
  • Thermal Shutdown Protection: Yes

Pin Configuration

The XC6123D725MR-G has the following pin configuration:

```

| | --| |-- |____| ```

Pin 1: VIN (Input Voltage) Pin 2: GND (Ground) Pin 3: VOUT (Output Voltage)

Functional Features

  • Low dropout voltage ensures efficient regulation even with small input-output voltage differentials.
  • Low quiescent current minimizes power consumption in standby or idle modes.
  • Short circuit protection prevents damage to the regulator and connected components in case of a short circuit.
  • Thermal shutdown protection safeguards against overheating, ensuring safe operation.

Advantages and Disadvantages

Advantages

  • Wide input voltage range allows for flexibility in various applications.
  • Low dropout voltage enables efficient power conversion.
  • Compact SOT-25 package saves board space.
  • Short circuit and thermal protection enhance reliability.

Disadvantages

  • Maximum output current of 200mA may limit its use in high-power applications.
  • Limited output voltage range may not be suitable for all voltage level requirements.

Working Principles

XC6123D725MR-G is a linear voltage regulator that uses a pass transistor to regulate the output voltage. It operates by comparing the reference voltage with the feedback voltage from the output, adjusting the pass transistor's resistance to maintain a stable output voltage.

Detailed Application Field Plans

XC6123D725MR-G can be used in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Industrial control systems - Automotive electronics - Medical equipment

Alternative Models

Some alternative models that offer similar functionality to XC6123D725MR-G include: - XC6206P332MR-G - XC6206P502MR-G - XC6206P182MR-G - XC6206P252MR-G

These models have different output voltage ranges and package types, allowing users to choose the most suitable option for their specific application requirements.

Word count: 442 words

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6123D725MR-G în soluțiile tehnice

Sure! Here are 10 common questions and answers related to the application of XC6123D725MR-G in technical solutions:

  1. Question: What is XC6123D725MR-G?
    Answer: XC6123D725MR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6123D725MR-G?
    Answer: The operating voltage range of XC6123D725MR-G is typically between 0.7V and 6.0V.

  3. Question: How does XC6123D725MR-G detect voltage levels?
    Answer: XC6123D725MR-G uses a built-in voltage reference and comparator to monitor the input voltage and compare it with a preset threshold.

  4. Question: What is the output signal of XC6123D725MR-G?
    Answer: XC6123D725MR-G provides an active low output signal, which means the output goes low when the input voltage falls below the threshold.

  5. Question: Can XC6123D725MR-G be used in battery-powered applications?
    Answer: Yes, XC6123D725MR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  6. Question: What is the accuracy of the voltage detection in XC6123D725MR-G?
    Answer: The accuracy of XC6123D725MR-G is typically ±1.5% at room temperature.

  7. Question: Can XC6123D725MR-G be used for overvoltage protection?
    Answer: No, XC6123D725MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  8. Question: What is the response time of XC6123D725MR-G?
    Answer: The response time of XC6123D725MR-G is typically 200µs, which means it can quickly detect voltage drops.

  9. Question: Can XC6123D725MR-G be used in automotive applications?
    Answer: Yes, XC6123D725MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.

  10. Question: How is XC6123D725MR-G packaged?
    Answer: XC6123D725MR-G is available in a small SOT-25 package, which makes it suitable for space-constrained applications.

Please note that these answers are general and may vary depending on the specific datasheet and application requirements.