Torex Semiconductor Ltd
Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
XC6122A337MR-G
Vezi detalii Foi de date

XC6122A337MR-G

Product Overview

Category

XC6122A337MR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Voltage regulation
  • Compact size
  • Low power consumption
  • High efficiency

Package

XC6122A337MR-G comes in a small surface-mount package.

Essence

The essence of XC6122A337MR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 200mA
  • Dropout Voltage: 150mV (typical)
  • Quiescent Current: 35µA (typical)

Detailed Pin Configuration

XC6122A337MR-G has the following pin configuration:

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Voltage regulation: XC6122A337MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: It incorporates overcurrent protection to prevent damage to the circuitry.
  • Thermal shutdown: In case of excessive heat, the regulator shuts down to avoid overheating.

Advantages and Disadvantages

Advantages

  • Small form factor allows for easy integration into compact electronic devices.
  • Low power consumption helps conserve energy.
  • High efficiency results in minimal power loss during voltage regulation.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6122A337MR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122A337MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A337MR-G are: - XC6206P332MR - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Word count: 320 words

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6122A337MR-G în soluțiile tehnice

Sure! Here are 10 common questions and answers related to the application of XC6122A337MR-G in technical solutions:

  1. Question: What is XC6122A337MR-G?
    - Answer: XC6122A337MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is used to monitor the voltage level of a power supply and provide an output signal when the voltage falls below a certain threshold.

  2. Question: What is the operating voltage range of XC6122A337MR-G?
    - Answer: The operating voltage range of XC6122A337MR-G is from 0.7V to 6.0V.

  3. Question: What is the typical voltage detection accuracy of XC6122A337MR-G?
    - Answer: The typical voltage detection accuracy of XC6122A337MR-G is ±1.5%.

  4. Question: What is the quiescent current consumption of XC6122A337MR-G?
    - Answer: The quiescent current consumption of XC6122A337MR-G is typically 1.0µA.

  5. Question: Can XC6122A337MR-G be used in battery-powered applications?
    - Answer: Yes, XC6122A337MR-G is suitable for battery-powered applications due to its low quiescent current consumption.

  6. Question: What is the output configuration of XC6122A337MR-G?
    - Answer: XC6122A337MR-G has an open-drain output configuration, which means it requires an external pull-up resistor to provide a logic-level output signal.

  7. Question: What is the maximum output sink current of XC6122A337MR-G?
    - Answer: The maximum output sink current of XC6122A337MR-G is 20mA.

  8. Question: Can XC6122A337MR-G be used in automotive applications?
    - Answer: Yes, XC6122A337MR-G is AEC-Q100 qualified and suitable for automotive applications.

  9. Question: Does XC6122A337MR-G have built-in hysteresis?
    - Answer: Yes, XC6122A337MR-G has a built-in hysteresis of typically 10% to prevent output oscillation near the detection threshold.

  10. Question: What is the package type of XC6122A337MR-G?
    - Answer: XC6122A337MR-G is available in a SOT-25 package, which is a small surface-mount package with 5 pins.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.