Consultați specificațiile pentru detalii despre produs.
XC6118C08DGR-G
Product Overview
Category
XC6118C08DGR-G belongs to the category of voltage regulators.
Use
It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.
Characteristics
- Voltage regulation: XC6118C08DGR-G provides a stable output voltage.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected.
- Thermal shutdown protection: It automatically shuts down to prevent damage due to excessive heat.
Package
XC6118C08DGR-G comes in a small surface-mount package, making it suitable for compact electronic devices.
Essence
The essence of XC6118C08DGR-G lies in its ability to maintain a constant voltage level, ensuring reliable operation of electronic components.
Packaging/Quantity
This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.
Specifications
- Input voltage range: 2.5V - 6.0V
- Output voltage: 0.8V
- Maximum output current: 150mA
- Dropout voltage: 200mV (at 100mA)
- Quiescent current: 30µA
- Operating temperature range: -40°C to +85°C
Detailed Pin Configuration
XC6118C08DGR-G has the following pin configuration:
- VIN: Input voltage pin
- GND: Ground pin
- VOUT: Output voltage pin
Functional Features
- Voltage regulation: XC6118C08DGR-G maintains a stable output voltage regardless of variations in the input voltage.
- Low dropout voltage: It can operate efficiently even when the input voltage is very close to the output voltage.
- Low quiescent current: The regulator consumes minimal current when no load is connected, conserving power.
- Thermal shutdown protection: It automatically shuts down if the temperature exceeds a safe limit, protecting the device from damage.
Advantages and Disadvantages
Advantages
- Stable output voltage ensures reliable operation of electronic components.
- Low dropout voltage allows efficient operation even with small voltage differences.
- Low quiescent current helps conserve power in battery-powered devices.
- Thermal shutdown protection prevents damage due to excessive heat.
Disadvantages
- Limited maximum output current (150mA) may not be suitable for high-power applications.
- Input voltage range (2.5V - 6.0V) restricts compatibility with certain systems.
Working Principles
XC6118C08DGR-G utilizes internal circuitry to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal feedback loop to maintain a constant output voltage. This ensures that the connected electronic components receive a stable power supply.
Detailed Application Field Plans
XC6118C08DGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6118C08DGR-G are: - LM1117-3.3 - LT1761ES5-3.3 - MCP1700-3302E/TO
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Word count: 389 words
Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6118C08DGR-G în soluțiile tehnice
Sure! Here are 10 common questions and answers related to the application of XC6118C08DGR-G in technical solutions:
Q: What is XC6118C08DGR-G? A: XC6118C08DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a specified threshold.
Q: What is the operating voltage range of XC6118C08DGR-G? A: The operating voltage range of XC6118C08DGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C08DGR-G help in technical solutions? A: XC6118C08DGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital circuits when the power supply voltage falls below a certain level, ensuring proper system initialization.
Q: Can XC6118C08DGR-G be used in battery-powered applications? A: Yes, XC6118C08DGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA, making it suitable for power-sensitive designs.
Q: What is the output type of XC6118C08DGR-G? A: XC6118C08DGR-G has an open-drain output type, which allows flexibility in connecting external components.
Q: What is the typical reset threshold voltage of XC6118C08DGR-G? A: The typical reset threshold voltage of XC6118C08DGR-G is 2.93V.
Q: Does XC6118C08DGR-G have a built-in delay time? A: Yes, XC6118C08DGR-G has a built-in delay time of typically 200ms to ensure stable power supply before releasing the reset signal.
Q: Can XC6118C08DGR-G be used in automotive applications? A: Yes, XC6118C08DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6118C08DGR-G? A: XC6118C08DGR-G is available in a small SOT-25 package, which is compact and space-saving.
Q: Is XC6118C08DGR-G RoHS compliant? A: Yes, XC6118C08DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C08DGR-G.