Torex Semiconductor Ltd
Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
XC6108C28DGR-G
Vezi detalii Foi de date

XC6108C28DGR-G

Product Overview

Category

XC6108C28DGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize the voltage supplied to various components.

Characteristics

  • Voltage regulation: XC6108C28DGR-G provides a stable output voltage.
  • Low dropout voltage: It operates efficiently even when the input voltage is close to the output voltage.
  • Low quiescent current: The regulator consumes minimal current when no load is connected.
  • Thermal shutdown protection: It automatically shuts down to prevent damage from excessive heat.

Package

XC6108C28DGR-G is available in a small surface-mount package.

Essence

The essence of XC6108C28DGR-G lies in its ability to maintain a constant voltage output, ensuring reliable operation of electronic devices.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input voltage range: 2.5V - 6.0V
  • Output voltage: 2.8V
  • Output current: Up to 150mA
  • Dropout voltage: 200mV (typical)
  • Quiescent current: 30µA (typical)
  • Operating temperature range: -40°C to +85°C

Detailed Pin Configuration

XC6108C28DGR-G has the following pin configuration:

  1. VIN (Input voltage)
  2. GND (Ground)
  3. VOUT (Output voltage)

Functional Features

  • Voltage regulation: Maintains a stable output voltage regardless of input variations.
  • Overcurrent protection: Safeguards against excessive current flow.
  • Thermal shutdown protection: Prevents overheating by shutting down the regulator.
  • Short-circuit protection: Automatically disables the output in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Compact size and surface-mount package for easy integration into circuits.
  • Low dropout voltage ensures efficient operation even with low input voltages.
  • Low quiescent current minimizes power consumption.
  • Provides reliable voltage regulation for electronic components.

Disadvantages

  • Limited output current capacity (up to 150mA).
  • Not suitable for high-power applications.

Working Principles

XC6108C28DGR-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6108C28DGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Embedded systems - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C28DGR-G are: - LM1117-2.8: A popular voltage regulator with similar specifications. - MCP1700-2802E: Another voltage regulator offering stable 2.8V output. - TS2937CP-2.8: A low dropout voltage regulator suitable for various applications.

These alternative models provide similar functionality and can be used as substitutes depending on specific requirements.

Word count: 399

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6108C28DGR-G în soluțiile tehnice

Sure! Here are 10 common questions and answers related to the application of XC6108C28DGR-G in technical solutions:

  1. Q: What is XC6108C28DGR-G? A: XC6108C28DGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6108C28DGR-G? A: The operating voltage range of XC6108C28DGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C28DGR-G help in technical solutions? A: XC6108C28DGR-G helps in technical solutions by ensuring proper system operation and preventing data corruption or malfunctioning due to low voltage conditions.

  4. Q: Can XC6108C28DGR-G be used in battery-powered applications? A: Yes, XC6108C28DGR-G can be used in battery-powered applications as it has a low quiescent current consumption, making it suitable for power-sensitive designs.

  5. Q: What is the output type of XC6108C28DGR-G? A: XC6108C28DGR-G has an open-drain output, which means it can be connected to other devices with different voltage levels.

  6. Q: What is the typical reset threshold voltage of XC6108C28DGR-G? A: The typical reset threshold voltage of XC6108C28DGR-G is 2.8V.

  7. Q: Does XC6108C28DGR-G have a built-in delay time for the reset signal? A: Yes, XC6108C28DGR-G has a built-in delay time of approximately 200ms to ensure stable power supply before releasing the reset signal.

  8. Q: Can XC6108C28DGR-G be used in automotive applications? A: Yes, XC6108C28DGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6108C28DGR-G? A: XC6108C28DGR-G is available in a small SOT-25 package, which is compact and easy to integrate into various designs.

  10. Q: Is XC6108C28DGR-G RoHS compliant? A: Yes, XC6108C28DGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C28DGR-G.