Consultați specificațiile pentru detalii despre produs.
XC6108C10BGR-G
Product Overview
Category
XC6108C10BGR-G belongs to the category of voltage regulators.
Use
It is commonly used as a power management solution in electronic devices.
Characteristics
- Voltage regulation capability
- Low dropout voltage
- High accuracy
- Thermal shutdown protection
- Overcurrent protection
Package
XC6108C10BGR-G is available in a small form factor package, such as SOT-23.
Essence
The essence of XC6108C10BGR-G lies in its ability to regulate and stabilize voltage levels in electronic circuits.
Packaging/Quantity
Typically, XC6108C10BGR-G is packaged in reels or tubes, with quantities varying based on customer requirements.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage: 1.0V
- Dropout Voltage: 150mV (typical)
- Maximum Output Current: 100mA
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC6108C10BGR-G has three pins:
- VIN: Input voltage pin
- VOUT: Output voltage pin
- GND: Ground pin
Functional Features
- Voltage regulation: XC6108C10BGR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Low dropout voltage: It operates efficiently even when the input voltage is close to the desired output voltage.
- Thermal shutdown protection: In case of excessive temperature, the device shuts down to prevent damage.
- Overcurrent protection: It safeguards the circuit by limiting the output current during abnormal conditions.
Advantages and Disadvantages
Advantages
- High accuracy in voltage regulation
- Low quiescent current consumption
- Compact package size for space-constrained applications
- Thermal and overcurrent protection enhance reliability
Disadvantages
- Limited maximum output current (100mA)
- Restricted input voltage range (2.5V - 6.0V)
Working Principles
XC6108C10BGR-G utilizes a feedback mechanism to maintain a constant output voltage. It compares the output voltage with a reference voltage and adjusts the internal circuitry accordingly. By continuously monitoring and adjusting, it ensures a stable output voltage despite variations in the input voltage.
Detailed Application Field Plans
XC6108C10BGR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices
In these applications, it provides reliable power management, ensuring stable voltage supply to critical components.
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC6108C10BGR-G are: - LM1117-1.0 - MCP1700-100 - LP2985-1.0
These models offer similar voltage regulation capabilities and can be suitable replacements based on specific requirements.
Word count: 410 words
Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui XC6108C10BGR-G în soluțiile tehnice
Sure! Here are 10 common questions and answers related to the application of XC6108C10BGR-G in technical solutions:
Q: What is XC6108C10BGR-G? A: XC6108C10BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6108C10BGR-G? A: The operating voltage range of XC6108C10BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6108C10BGR-G help in technical solutions? A: XC6108C10BGR-G helps in technical solutions by ensuring stable operation of electronic devices by monitoring the power supply voltage and providing a reset signal when necessary.
Q: Can XC6108C10BGR-G be used in battery-powered applications? A: Yes, XC6108C10BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the output type of XC6108C10BGR-G? A: XC6108C10BGR-G has an open-drain output type, which means it can be connected to other devices with different voltage levels.
Q: What is the typical reset threshold voltage of XC6108C10BGR-G? A: The typical reset threshold voltage of XC6108C10BGR-G is 1.0V.
Q: Does XC6108C10BGR-G have built-in hysteresis? A: Yes, XC6108C10BGR-G has built-in hysteresis of typically 0.1V, which helps to prevent chattering or false triggering of the reset signal.
Q: Can XC6108C10BGR-G be used in automotive applications? A: Yes, XC6108C10BGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.
Q: What is the package type of XC6108C10BGR-G? A: XC6108C10BGR-G is available in a small SOT-25 package, which is compact and suitable for space-constrained designs.
Q: Is XC6108C10BGR-G RoHS compliant? A: Yes, XC6108C10BGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring it meets environmental regulations.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6108C10BGR-G.