The TPS3702CX33DDCR belongs to the category of integrated circuits (ICs) and specifically falls under the family of voltage supervisors.
This product is primarily used for monitoring and supervising voltage levels in electronic systems. It ensures that the voltage remains within a specified range, triggering appropriate actions when it goes beyond the set limits.
The TPS3702CX33DDCR is available in a small surface-mount package known as SOT-23-5. It is supplied in tape and reel packaging, with a quantity of 3000 units per reel.
The TPS3702CX33DDCR has a total of five pins arranged as follows:
_______
RESET | |
GND | |
VIN | |
| |
VOUT |_______|
Pin Description: - RESET: Output pin for the reset signal. - GND: Ground reference. - VIN: Input voltage pin. - VOUT: Output voltage pin.
The TPS3702CX33DDCR operates by comparing the input voltage (VIN) with the set threshold voltage. If the input voltage drops below the threshold, the device triggers a reset signal on the RESET pin. This signal can be used to initiate system shutdown or recovery procedures.
The threshold voltage can be adjusted by connecting external resistors to the appropriate pins. This flexibility allows users to tailor the voltage supervision to their specific requirements.
The TPS3702CX33DDCR finds application in various fields where voltage monitoring is critical. Some potential areas of use include:
For users seeking alternative options, the following models provide similar functionality:
These models offer comparable features and specifications, providing flexibility in choosing the most suitable option for specific applications.
In conclusion, the TPS3702CX33DDCR is a voltage supervisor IC that offers accurate monitoring, adjustable thresholds, and low power consumption. Its wide operating voltage range and reset output make it suitable for various applications. However, it has limited threshold voltage options and comes in a slightly larger package. Overall, this device plays a crucial role in maintaining stable voltage levels in electronic systems.
Sure! Here are 10 common questions and answers related to the application of TPS3702CX33DDCR in technical solutions:
Q: What is TPS3702CX33DDCR? A: TPS3702CX33DDCR is a voltage supervisor and reset IC manufactured by Texas Instruments.
Q: What is the purpose of TPS3702CX33DDCR in technical solutions? A: TPS3702CX33DDCR is used to monitor the voltage level of a system and generate a reset signal when the voltage falls below a certain threshold.
Q: What is the operating voltage range of TPS3702CX33DDCR? A: TPS3702CX33DDCR operates within a voltage range of 1.8V to 6.5V.
Q: Can TPS3702CX33DDCR be used in battery-powered applications? A: Yes, TPS3702CX33DDCR can be used in battery-powered applications as it has a low quiescent current consumption.
Q: How does TPS3702CX33DDCR detect undervoltage conditions? A: TPS3702CX33DDCR compares the monitored voltage with a reference voltage and asserts the reset output when the monitored voltage drops below the reference voltage.
Q: Can TPS3702CX33DDCR be used for overvoltage protection? A: No, TPS3702CX33DDCR is specifically designed for undervoltage detection and does not provide overvoltage protection.
Q: What is the typical reset threshold voltage of TPS3702CX33DDCR? A: The typical reset threshold voltage of TPS3702CX33DDCR is 3.3V.
Q: Does TPS3702CX33DDCR have any adjustable features? A: No, TPS3702CX33DDCR does not have any adjustable features. The reset threshold voltage is fixed at 3.3V.
Q: Can TPS3702CX33DDCR be used in automotive applications? A: Yes, TPS3702CX33DDCR is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What package options are available for TPS3702CX33DDCR? A: TPS3702CX33DDCR is available in a small SOT-23 package, which is commonly used in space-constrained applications.
Please note that these answers are general and may vary depending on the specific requirements and datasheet of TPS3702CX33DDCR.