Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
SN65HVD3083EDGSG4

SN65HVD3083EDGSG4

Product Overview

  • Category: Integrated Circuit
  • Use: Transceiver
  • Characteristics: High-speed, low-power, half-duplex communication
  • Package: 8-pin SOIC (Small Outline Integrated Circuit)
  • Essence: Facilitates reliable data transmission in industrial applications
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 3 V to 5.5 V
  • Data Rate: Up to 5 Mbps
  • Operating Temperature Range: -40°C to +125°C
  • ESD Protection: ±16 kV HBM (Human Body Model)
  • Receiver Input Threshold: ±200 mV
  • Driver Output Impedance: 60 Ω

Detailed Pin Configuration

  1. VCC: Power supply input
  2. GND: Ground reference
  3. RxD: Receiver data input
  4. TxD: Transmitter data output
  5. DE: Driver enable control
  6. RE: Receiver enable control
  7. RS: Receiver output state
  8. RO: Receiver output

Functional Features

  • Half-duplex communication: Allows transmission and reception of data on a single communication line.
  • Low-power consumption: Optimized for energy-efficient operation.
  • High-speed data transfer: Supports data rates up to 5 Mbps.
  • Robust communication: Provides ESD protection and receiver input threshold for reliable data reception.
  • Enable control: Allows control over the driver and receiver functions.

Advantages and Disadvantages

Advantages: - Suitable for industrial applications due to its robustness and reliability. - Low power consumption makes it ideal for battery-powered devices. - High-speed data transfer enables quick communication.

Disadvantages: - Limited to half-duplex communication only. - Requires external components for complete functionality.

Working Principles

The SN65HVD3083EDGSG4 is a transceiver integrated circuit designed for half-duplex communication. It operates by transmitting and receiving data on a single communication line. The driver and receiver functions are controlled using the DE (Driver Enable) and RE (Receiver Enable) pins, respectively.

When the DE pin is high, the transmitter is enabled, allowing data to be sent through the TxD pin. On the other hand, when the RE pin is high, the receiver is enabled, and data received through the RxD pin can be processed.

The transceiver ensures reliable data transmission by providing ESD protection and a receiver input threshold to filter out noise and ensure accurate reception.

Detailed Application Field Plans

The SN65HVD3083EDGSG4 is widely used in various industrial applications that require reliable and efficient data communication. Some of the common application fields include:

  1. Industrial Automation: Used in PLCs (Programmable Logic Controllers), motor control systems, and industrial sensors for communication between different components.
  2. Building Automation: Enables communication between HVAC (Heating, Ventilation, and Air Conditioning) systems, lighting controls, and security systems.
  3. Automotive Electronics: Facilitates communication between different electronic modules in vehicles, such as engine control units, body control modules, and infotainment systems.
  4. Smart Grids: Used in energy management systems, smart meters, and power distribution networks for efficient data exchange.
  5. Robotics: Enables communication between various robotic components, including sensors, actuators, and control systems.

Detailed and Complete Alternative Models

  1. MAX485: Similar half-duplex transceiver with higher data rate capability.
  2. LTC2862: Low-power transceiver with extended temperature range.
  3. SN65HVD230: Half-duplex transceiver with lower supply voltage range.

(Note: This is not an exhaustive list, and there are several other alternative models available in the market.)

Word count: 511 words

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui SN65HVD3083EDGSG4 în soluțiile tehnice

Sure! Here are 10 common questions and answers related to the application of SN65HVD3083EDGSG4 in technical solutions:

  1. Q: What is SN65HVD3083EDGSG4? A: SN65HVD3083EDGSG4 is a high-speed CAN transceiver designed for use in automotive and industrial applications.

  2. Q: What is the maximum data rate supported by SN65HVD3083EDGSG4? A: SN65HVD3083EDGSG4 supports a maximum data rate of 5 Mbps.

  3. Q: Can SN65HVD3083EDGSG4 be used in both 3.3V and 5V systems? A: Yes, SN65HVD3083EDGSG4 is compatible with both 3.3V and 5V systems.

  4. Q: Is SN65HVD3083EDGSG4 suitable for long-distance communication? A: Yes, SN65HVD3083EDGSG4 has excellent noise immunity and can support communication over long distances.

  5. Q: Does SN65HVD3083EDGSG4 have built-in protection features? A: Yes, SN65HVD3083EDGSG4 includes built-in protection against bus faults such as short-circuits and over-temperature conditions.

  6. Q: Can SN65HVD3083EDGSG4 be used in harsh environments? A: Yes, SN65HVD3083EDGSG4 is designed to operate reliably in harsh automotive and industrial environments.

  7. Q: How many nodes can be connected to SN65HVD3083EDGSG4? A: SN65HVD3083EDGSG4 can support up to 120 nodes on a CAN bus.

  8. Q: Does SN65HVD3083EDGSG4 require external components for operation? A: Yes, SN65HVD3083EDGSG4 requires external passive components such as resistors and capacitors for proper operation.

  9. Q: Can SN65HVD3083EDGSG4 be used in low-power applications? A: Yes, SN65HVD3083EDGSG4 has a low standby current and can be used in low-power applications.

  10. Q: Is SN65HVD3083EDGSG4 compatible with other CAN transceivers? A: Yes, SN65HVD3083EDGSG4 is compatible with other CAN transceivers that adhere to the ISO 11898 standard.

Please note that these answers are general and may vary depending on specific application requirements.