NXP USA Inc.
Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
MMA6827KCWR2

MMA6827KCWR2

Product Overview

Category

The MMA6827KCWR2 belongs to the category of motion sensors, specifically an accelerometer.

Use

It is used for measuring acceleration and tilt in various applications such as automotive, industrial, and consumer electronics.

Characteristics

  • High sensitivity
  • Low power consumption
  • Compact size
  • Wide operating temperature range

Package

The sensor comes in a small surface-mount package, making it suitable for integration into compact electronic devices.

Essence

The essence of the MMA6827KCWR2 lies in its precise measurement of acceleration and tilt, enabling accurate motion detection and control.

Packaging/Quantity

The sensor is typically supplied in reels or trays, with quantities varying based on manufacturer specifications.

Specifications

  • Measurement Range: ±2g, ±4g, ±8g, ±16g
  • Output Resolution: 14-bit
  • Operating Voltage: 1.71V to 3.6V
  • Operating Temperature: -40°C to +85°C
  • Output Interface: I2C/SPI

Detailed Pin Configuration

The MMA6827KCWR2 has a standard pin configuration with specific pins dedicated to power supply, communication interface, and data output. The detailed pinout is as follows:

| Pin Name | Function | |----------|----------------| | VDD | Power Supply | | GND | Ground | | SDA | I2C Data Line | | SCL | I2C Clock Line | | INT | Interrupt | | CS | Chip Select | | SA0 | Address Select |

Functional Features

  • Motion Detection: The sensor can accurately detect motion and changes in orientation.
  • Tilt Sensing: It provides precise tilt measurements, making it suitable for applications requiring inclination sensing.
  • Low Power Operation: The MMA6827KCWR2 is designed for low power consumption, extending battery life in portable devices.

Advantages and Disadvantages

Advantages

  • High sensitivity for accurate motion detection
  • Wide operating temperature range
  • Compact size for easy integration into various devices

Disadvantages

  • Limited measurement range compared to some other accelerometers
  • Requires careful calibration for optimal performance in certain applications

Working Principles

The MMA6827KCWR2 operates based on the principles of microelectromechanical systems (MEMS) technology. It utilizes a microscopic mass suspended by springs within the sensor structure. When subjected to acceleration or tilt, the displacement of the mass is measured, providing precise output signals corresponding to the applied forces.

Detailed Application Field Plans

Automotive

In automotive applications, the MMA6827KCWR2 can be used for vehicle stability control, rollover detection, and impact sensing systems.

Industrial

For industrial use, the sensor is suitable for vibration monitoring, equipment condition monitoring, and structural health monitoring.

Consumer Electronics

In consumer electronics, the sensor can enable features such as screen rotation, gaming control, and activity tracking in wearable devices.

Detailed and Complete Alternative Models

  • MMA8452Q: A similar accelerometer with higher measurement range options and advanced embedded features.
  • ADXL345: An alternative accelerometer known for its robustness and high shock resistance.

In conclusion, the MMA6827KCWR2 accelerometer offers precise motion and tilt sensing capabilities with a focus on low power consumption and compact design. Its wide application potential across automotive, industrial, and consumer electronics sectors makes it a versatile choice for motion sensing requirements.

[Word Count: 536]

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui MMA6827KCWR2 în soluțiile tehnice

  1. What is the MMA6827KCWR2?

    • The MMA6827KCWR2 is a high-performance, low-power, three-axis accelerometer designed for various technical solutions.

  2. What are the key features of the MMA6827KCWR2?

    • The key features include low power consumption, high accuracy, digital output, and a wide operating voltage range.

  3. How can the MMA6827KCWR2 be used in motion tracking applications?

    • The MMA6827KCWR2 can be used to detect and measure motion in applications such as fitness trackers, smartwatches, and gesture recognition systems.

  4. What are the typical power requirements for the MMA6827KCWR2?

    • The MMA6827KCWR2 typically operates on a supply voltage of 1.71 V to 3.6 V and consumes very low power, making it suitable for battery-powered devices.

  5. Can the MMA6827KCWR2 be used in automotive applications?

    • Yes, the MMA6827KCWR2 is suitable for automotive applications such as vehicle stability control, rollover detection, and impact sensing.

  6. How does the MMA6827KCWR2 communicate with microcontrollers or processors?

    • The MMA6827KCWR2 communicates via an I2C or SPI interface, allowing seamless integration with a wide range of microcontrollers and processors.

  7. What are the environmental conditions that the MMA6827KCWR2 can operate in?

    • The MMA6827KCWR2 is designed to operate in harsh environments and can withstand mechanical shock and vibration, making it suitable for industrial and outdoor applications.

  8. Can the MMA6827KCWR2 be used for tilt sensing and orientation detection?

    • Yes, the MMA6827KCWR2 can accurately detect tilt and orientation changes, making it ideal for applications such as screen rotation in mobile devices and leveling instruments.

  9. What are the available output data formats from the MMA6827KCWR2?

    • The MMA6827KCWR2 provides output data in various formats, including acceleration, tilt, and orientation information in both raw and processed forms.

  10. Are there any specific design considerations when integrating the MMA6827KCWR2 into a technical solution?

    • Design considerations include proper PCB layout, power supply filtering, and calibration to ensure accurate and reliable performance in the intended application.