Consultați specificațiile pentru detalii despre produs.
AT94K10AL-25BQC
Product Overview
Category
AT94K10AL-25BQC belongs to the category of Field Programmable Gate Arrays (FPGAs).
Use
This product is primarily used in digital logic circuits for various applications such as signal processing, data processing, and control systems.
Characteristics
- High-speed performance
- Reconfigurable architecture
- Low power consumption
- Large number of programmable logic elements
- Flexible I/O options
Package
AT94K10AL-25BQC is available in a Quad Flat Package (QFP) with 100 pins.
Essence
The essence of this product lies in its ability to be programmed and reprogrammed to perform specific functions, making it highly versatile and adaptable.
Packaging/Quantity
AT94K10AL-25BQC is typically packaged in reels or trays, with each reel or tray containing a specific quantity of units. The exact packaging and quantity may vary depending on the supplier.
Specifications
- Operating Frequency: 25 MHz
- Logic Elements: 10,000
- Embedded Memory: 64 Kbits
- I/O Pins: 80
- Voltage Range: 3.3V
- Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The pin configuration of AT94K10AL-25BQC is as follows:
- VCCIO
- GND
- IO0
- IO1
- IO2
- IO3
- IO4
- IO5
- IO6
- IO7
- IO8
- IO9
- IO10
- IO11
- IO12
- IO13
- IO14
- IO15
- IO16
- IO17
- IO18
- IO19
- IO20
- IO21
- IO22
- IO23
- IO24
- IO25
- IO26
- IO27
- IO28
- IO29
- IO30
- IO31
- IO32
- IO33
- IO34
- IO35
- IO36
- IO37
- IO38
- IO39
- IO40
- IO41
- IO42
- IO43
- IO44
- IO45
- IO46
- IO47
- IO48
- IO49
- IO50
- IO51
- IO52
- IO53
- IO54
- IO55
- IO56
- IO57
- IO58
- IO59
- IO60
- IO61
- IO62
- IO63
- IO64
- IO65
- IO66
- IO67
- IO68
- IO69
- IO70
- IO71
- IO72
- IO73
- IO74
- IO75
- IO76
- IO77
- IO78
- IO79
- IO80
- IO81
- IO82
- IO83
- IO84
- IO85
- IO86
- IO87
- IO88
- IO89
- IO90
- IO91
- IO92
- IO93
- IO94
- IO95
- IO96
- GND
Functional Features
- Reconfigurable logic elements allow for flexible circuit design.
- Embedded memory enables efficient data storage and retrieval.
- High-speed performance ensures rapid processing of digital signals.
- Flexible I/O options facilitate seamless integration with external devices.
Advantages
- Versatile and adaptable due to reprogrammable nature.
- Low power consumption leads to energy efficiency.
- Large number of programmable logic elements provide ample resources for complex designs.
- Wide temperature range allows for operation in various environments.
Disadvantages
- Limited operating frequency compared to some other FPGAs.
- Relatively smaller embedded memory capacity.
- Higher cost compared to traditional fixed-function integrated circuits.
Working Principles
AT94K10AL-25BQC operates based on the principles of configurable logic blocks, interconnects, and embedded memory. The logic blocks can be programmed to perform specific functions, while the interconnects enable communication between these blocks. The embedded memory allows for temporary or permanent storage of data during operation.
Detailed Application Field Plans
Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui AT94K10AL-25BQC în soluțiile tehnice
Sure! Here are 10 common questions and answers related to the application of AT94K10AL-25BQC in technical solutions:
Q: What is the AT94K10AL-25BQC? A: The AT94K10AL-25BQC is a high-performance Field Programmable Gate Array (FPGA) device manufactured by Microchip Technology.
Q: What are the key features of the AT94K10AL-25BQC? A: The key features include 10,000 logic cells, 25 MHz maximum operating frequency, 5V tolerant I/Os, and embedded Flash memory for configuration storage.
Q: What are some typical applications of the AT94K10AL-25BQC? A: The AT94K10AL-25BQC is commonly used in industrial automation, motor control, communication systems, medical devices, and automotive electronics.
Q: How can I program the AT94K10AL-25BQC? A: The AT94K10AL-25BQC can be programmed using Microchip's development tools such as the Atmel Studio IDE or third-party programming tools compatible with the JTAG interface.
Q: Can I reprogram the AT94K10AL-25BQC multiple times? A: Yes, the AT94K10AL-25BQC supports in-system reprogramming, allowing you to update the configuration multiple times during its lifetime.
Q: What is the power supply requirement for the AT94K10AL-25BQC? A: The AT94K10AL-25BQC requires a single 3.3V power supply for normal operation.
Q: Does the AT94K10AL-25BQC support external memory interfaces? A: Yes, the AT94K10AL-25BQC provides dedicated pins for interfacing with external memory devices such as SRAM or Flash.
Q: Can I use the AT94K10AL-25BQC in a battery-powered application? A: Yes, the AT94K10AL-25BQC is designed to be power-efficient and can be used in battery-powered applications, provided the power supply requirements are met.
Q: Are there any development boards available for the AT94K10AL-25BQC? A: Yes, Microchip offers development boards specifically designed for the AT94K10AL-25BQC, which provide easy prototyping and evaluation capabilities.
Q: Where can I find technical documentation and support for the AT94K10AL-25BQC? A: You can find datasheets, application notes, and other technical documentation on Microchip's website. Additionally, Microchip provides customer support through their online forums and direct contact channels.
Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the official documentation and consult with technical experts for accurate information.