The 24LC64FT-I/OT belongs to the category of serial EEPROM (Electrically Erasable Programmable Read-Only Memory) devices.
It is commonly used for non-volatile data storage in various electronic systems, including consumer electronics, industrial equipment, and automotive applications.
The 24LC64FT-I/OT features a storage capacity of 64 Kbits (8192 bytes) and operates within a voltage range of 1.7V to 5.5V. It supports I2C communication protocol and offers a maximum clock frequency of 400 kHz.
The device has a total of 8 pins, including power supply, ground, and I2C communication interface pins. The pinout configuration is as follows: 1. A0 - Chip Address Input 2. A1 - Chip Address Input 3. A2 - Chip Address Input 4. VSS - Ground 5. SDA - I2C Serial Data Input/Output 6. SCL - I2C Serial Clock Input 7. WP - Write Protect 8. VCC - Power Supply
The 24LC64FT-I/OT offers: - Non-volatile data storage - Low power consumption - I2C interface for easy integration - Write protection feature (WP pin) - High reliability and endurance
The device utilizes electrically erasable and programmable memory cells to store and retrieve data. It communicates with the host system using the I2C protocol, allowing for seamless integration and data transfer.
The 24LC64FT-I/OT is suitable for a wide range of applications, including but not limited to: - Smart home devices - Automotive electronics - Industrial control systems - Wearable technology - IoT (Internet of Things) devices
Some alternative models to consider include: - 24LC128-I/OT: Offers double the storage capacity - 24AA64T-I/OT: Provides similar functionality with a different addressing scheme - 25LC64-I/OT: SPI interface-based EEPROM with comparable capacity
In conclusion, the 24LC64FT-I/OT is a versatile and reliable serial EEPROM device that finds widespread use in diverse electronic applications, offering efficient non-volatile data storage and retrieval capabilities.
Word Count: 411
Question: What is the maximum clock frequency for the 24LC64FT-I/OT?
Answer: The maximum clock frequency for the 24LC64FT-I/OT is 400 kHz.
Question: What is the operating voltage range for the 24LC64FT-I/OT?
Answer: The operating voltage range for the 24LC64FT-I/OT is 1.7V to 5.5V.
Question: Can the 24LC64FT-I/OT be used in automotive applications?
Answer: Yes, the 24LC64FT-I/OT is AEC-Q100 qualified and suitable for automotive applications.
Question: What is the typical write cycle time for the 24LC64FT-I/OT?
Answer: The typical write cycle time for the 24LC64FT-I/OT is 5 ms.
Question: Does the 24LC64FT-I/OT support sequential reads?
Answer: Yes, the 24LC64FT-I/OT supports sequential reads for efficient data retrieval.
Question: What is the temperature range for the 24LC64FT-I/OT?
Answer: The temperature range for the 24LC64FT-I/OT is -40°C to 125°C.
Question: Can the 24LC64FT-I/OT operate in a low-power mode?
Answer: Yes, the 24LC64FT-I/OT has a low standby current for low-power operation.
Question: Is the 24LC64FT-I/OT compatible with I2C communication?
Answer: Yes, the 24LC64FT-I/OT is compatible with I2C communication protocol.
Question: What is the maximum number of write cycles for the 24LC64FT-I/OT?
Answer: The 24LC64FT-I/OT supports up to 1,000,000 write cycles.
Question: Can the 24LC64FT-I/OT be used in industrial control systems?
Answer: Yes, the 24LC64FT-I/OT is suitable for use in industrial control systems due to its robustness and reliability.