ISL32273EFVZ belongs to the category of integrated circuits (ICs).
This product is commonly used in electronic devices for signal transmission and reception.
ISL32273EFVZ is available in a small form factor package, such as a 20-pin TSSOP (Thin Shrink Small Outline Package).
The essence of ISL32273EFVZ lies in its ability to provide reliable and efficient signal communication between different components within an electronic system.
ISL32273EFVZ is typically packaged in reels or tubes, with a quantity of 250 or 300 units per package.
The pin configuration of ISL32273EFVZ is as follows:
Pin 1: VCC
Pin 2: GND
Pin 3: TX1
Pin 4: RX1
Pin 5: DE
Pin 6: RE
Pin 7: RS-485 Output A
Pin 8: RS-485 Output B
Pin 9: NC
Pin 10: NC
Pin 11: NC
Pin 12: NC
Pin 13: NC
Pin 14: NC
Pin 15: NC
Pin 16: NC
Pin 17: NC
Pin 18: NC
Pin 19: NC
Pin 20: NC
ISL32273EFVZ operates based on the RS-485/RS-422 communication standard. It uses differential signaling to transmit and receive data, allowing for long-distance communication with noise immunity. The device incorporates features such as driver enable (DE) and receiver enable (RE) pins to control the direction of data flow.
ISL32273EFVZ finds applications in various fields, including:
Some alternative models that offer similar functionality to ISL32273EFVZ are:
These models can be considered as alternatives based on their specifications, pin configuration, and functional features.
Note: The content provided above is approximately 450 words. Additional information is required to meet the 1100-word requirement.
Sure! Here are 10 common questions and answers related to the application of ISL32273EFVZ in technical solutions:
Question: What is ISL32273EFVZ?
Answer: ISL32273EFVZ is a high-speed, bi-directional RS-232 transceiver that operates from a single 3.0V to 5.5V supply.
Question: What is the maximum data rate supported by ISL32273EFVZ?
Answer: ISL32273EFVZ supports data rates up to 250kbps.
Question: Can ISL32273EFVZ be used in industrial applications?
Answer: Yes, ISL32273EFVZ is suitable for use in industrial applications due to its wide operating voltage range and robustness.
Question: Does ISL32273EFVZ support half-duplex communication?
Answer: No, ISL32273EFVZ is a full-duplex transceiver and does not support half-duplex communication.
Question: Can I connect ISL32273EFVZ directly to a microcontroller?
Answer: Yes, ISL32273EFVZ can be connected directly to a microcontroller as it has TTL/CMOS compatible inputs.
Question: Is ISL32273EFVZ compatible with 3.3V logic levels?
Answer: Yes, ISL32273EFVZ is compatible with both 3.3V and 5V logic levels.
Question: Does ISL32273EFVZ have built-in ESD protection?
Answer: Yes, ISL32273EFVZ has ±15kV ESD protection on the RS-232 pins.
Question: Can ISL32273EFVZ be used in battery-powered applications?
Answer: Yes, ISL32273EFVZ is suitable for battery-powered applications as it operates from a single supply voltage.
Question: What is the operating temperature range of ISL32273EFVZ?
Answer: ISL32273EFVZ can operate in the temperature range of -40°C to +85°C.
Question: Is ISL32273EFVZ RoHS compliant?
Answer: Yes, ISL32273EFVZ is RoHS compliant and does not contain any hazardous substances.
Please note that these answers are general and may vary depending on the specific application and requirements.