Intersil
Imaginea poate fi reprezentativă.
Consultați specificațiile pentru detalii despre produs.
EL6204CWZ-T7A
Vezi detalii Foi de date

EL6204CWZ-T7A

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High-performance voltage regulator
  • Package: Ceramic Wafer-Level Chip Scale Package (CWLP)
  • Essence: Regulates and stabilizes voltage in electronic devices
  • Packaging/Quantity: Available in reels of 2500 units

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 0.8V to 3.6V
  • Output Current: Up to 500mA
  • Quiescent Current: 50µA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Shutdown Current: <1µA (typical)

Detailed Pin Configuration

The EL6204CWZ-T7A has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin
  4. FB: Feedback pin
  5. VOUT: Output voltage pin

Functional Features

  • High Efficiency: The EL6204CWZ-T7A offers high efficiency, ensuring minimal power loss during voltage regulation.
  • Low Quiescent Current: With a low quiescent current, the IC consumes minimal power when not actively regulating voltage.
  • Wide Input Voltage Range: The device can accept input voltages ranging from 2.5V to 5.5V, making it suitable for various applications.
  • Adjustable Output Voltage: The output voltage can be adjusted within the range of 0.8V to 3.6V, providing flexibility for different requirements.
  • Short-Circuit Protection: The IC incorporates short-circuit protection to prevent damage in case of a fault.

Advantages and Disadvantages

Advantages: - High efficiency - Low quiescent current - Wide input voltage range - Adjustable output voltage - Short-circuit protection

Disadvantages: - Limited output current (up to 500mA)

Working Principles

The EL6204CWZ-T7A is a voltage regulator that operates based on the principle of switching regulation. It uses an internal control circuit to monitor the input voltage and adjust the duty cycle of the internal switch accordingly. This allows it to maintain a stable output voltage, even when the input voltage fluctuates.

Detailed Application Field Plans

The EL6204CWZ-T7A finds applications in various electronic devices where voltage regulation is crucial. Some potential application fields include:

  1. Mobile Devices: The IC can be used to regulate the voltage for power-hungry components in smartphones and tablets.
  2. IoT Devices: It is suitable for low-power IoT devices that require efficient voltage regulation.
  3. Wearable Electronics: The compact package and low power consumption make it ideal for wearable devices.
  4. Battery-Powered Systems: The wide input voltage range and low quiescent current make it suitable for battery-powered systems.

Detailed and Complete Alternative Models

  1. EL6204CIZ-T7A: Similar to EL6204CWZ-T7A but packaged in a standard SOIC package.
  2. EL6204CRZ-T7A: Similar to EL6204CWZ-T7A but packaged in a smaller DFN package.
  3. EL6204CTZ-T7A: Similar to EL6204CWZ-T7A but with a higher output current capability of up to 1A.

(Note: These alternative models may have slight variations in specifications and pin configuration.)

Word count: 334 words

Enumerați 10 întrebări și răspunsuri comune legate de aplicarea lui EL6204CWZ-T7A în soluțiile tehnice

Sure! Here are 10 common questions and answers related to the application of EL6204CWZ-T7A in technical solutions:

  1. Q: What is EL6204CWZ-T7A? A: EL6204CWZ-T7A is a specific model of integrated circuit (IC) designed for motor control applications.

  2. Q: What are the key features of EL6204CWZ-T7A? A: Some key features of EL6204CWZ-T7A include four half-bridge outputs, integrated bootstrap diodes, and thermal shutdown protection.

  3. Q: What is the maximum voltage rating for EL6204CWZ-T7A? A: The maximum voltage rating for EL6204CWZ-T7A is typically around 40 volts.

  4. Q: Can EL6204CWZ-T7A be used for bidirectional motor control? A: Yes, EL6204CWZ-T7A can be used for bidirectional motor control by utilizing its four half-bridge outputs.

  5. Q: Is EL6204CWZ-T7A suitable for high-power motor control applications? A: No, EL6204CWZ-T7A is not suitable for high-power motor control applications as it has a limited current handling capability.

  6. Q: Does EL6204CWZ-T7A require external components for operation? A: Yes, EL6204CWZ-T7A requires external components such as power supply, motor driver circuitry, and control signals.

  7. Q: Can EL6204CWZ-T7A handle PWM signals for speed control? A: Yes, EL6204CWZ-T7A can handle PWM (Pulse Width Modulation) signals for precise speed control of motors.

  8. Q: What is the typical operating temperature range for EL6204CWZ-T7A? A: The typical operating temperature range for EL6204CWZ-T7A is -40°C to +125°C.

  9. Q: Can EL6204CWZ-T7A be used in automotive applications? A: Yes, EL6204CWZ-T7A can be used in automotive applications as it meets the necessary requirements for automotive electronics.

  10. Q: Are there any application notes or reference designs available for EL6204CWZ-T7A? A: Yes, the manufacturer of EL6204CWZ-T7A typically provides application notes and reference designs to assist with its implementation in various technical solutions.

Please note that the answers provided here are general and may vary depending on specific requirements and use cases. It is always recommended to refer to the datasheet and documentation provided by the manufacturer for accurate information.